You need to keep your ebikes battery in the best possible condition if you want it to last and deliver maximum power output, which will result in better performance and range. If this is not done, several potential problems can be caused by older lithium-ion batteries. It is important to understand how you can extend the life of your batteries and achieve maximum range and charging times. This article covers information on how to extend your ebike battery life.
Charge the Battery Regularly
The charge of your ebike battery is important to its life. If you do not charge it regularly, the battery will lose its ability to hold a charge over time. This means that your bike will stop working at some point in time. You can never go wrong with charging your bike's battery regularly.
Avoid Extremes Temperature
When you store your ebike, ensure that you do not leave it in extreme temperatures for long periods. The best place to put your ebike when storing it is in a cool, dry place. Ensure no condensation or moisture on or around the bike when storing it for long periods.
Do Not Overcharge
Overcharging a lithium-ion battery can cause permanent damage to its internal components and reduce its lifespan significantly. When charging an electric bike battery, always use the manufacturer's recommended charging instructions for the best results!
Charge for 12 hours
All batteries should be fully charged before use. This is especially true of ebike batteries, which are often put through rigorous conditions in regular use. To avoid damaging the battery or reducing its lifespan, always charge your ebike battery for at least 12 hours before using it. This ensures that all cells are completely charged and ready to go. The actual time required will depend on the size of the battery, but 12 hours is typically a good rule of thumb.
Do not Store Empty Batteries
If you want to store batteries for an extended period, make sure they are fully charged. If they aren't fully charged when stored, they may develop a chemical imbalance that could lead to internal damage and reduced performance when used again in the future. Besides, it causes a buildup of gas inside the battery, which can cause damage to cells within the battery.
Use Standard Chargers
In general, you should use a charger made for your specific battery. Do not use another charger or battery if it is not compatible with your e-bike. If you want to charge your e-bike battery, make sure you buy a charger compatible with the battery and charge it safely if you do not have an electric bike yet. Consider buying one with a standard charger that can be used with other standard batteries. This will allow you to use the same charger on multiple bikes in the future if needed.
Choose the Right Ebike Battery
When it comes to selecting an ebike battery, there are several factors to consider: the type of bike you're using it with, how much power you need and how often you'll be using the battery, how long you want your battery to last, and how much money you want to spend. The more powerful your bike is, and the more often you plan on riding it, the more important it is that you choose a high-quality ebike battery that can handle everything you throw at it without breaking down or losing power.
Don't Leave It Unplugged for Prolonged Periods of Time
If you're not using your ebike battery for any time (say, over the winter), make sure that you unplug it from your bike and store it somewhere safe where it won't be damaged by extreme temperatures or moisture. If possible, keep your battery charged at all times so that if anything happens while it's in storage—like if someone steals it!—it will still have some juice when they try to use or sell it later on down the road.
Clean Your Battery Contacts Weekly and Inspect Them for Corrosion or Other Damage
Ebike batteries are like most other batteries in that they need to be cleaned regularly. This will help prevent corrosion, which can lead to battery failure. If you have a removable battery, it's easy to do this yourself. Simply take a cotton swab dipped in rubbing alcohol and wipe down the battery's terminals. You can also use soap and water, but make sure you dry them thoroughly before putting them back into your ebike.
To inspect your battery for corrosion or other damage:
•Remove it from the ebike and hold it up to the light to see inside clearly.
•Look for any signs of corrosion or cracks in any plastic parts of the battery (especially near where the wires connect).
•If there are cracks or other damages, contact your local bike shop immediately!
Ebikes are typically ridden harder on the streets than regular bikes. Your ebike battery routinely experiences exposure to the elements, whether riding or parked. All of this can take a toll on your ebike battery. Keeping eyes on your ebike battery is a nice way to make your bike service longer.