All the Things You Should Know to Familiarize Your Ebike

All the Things You Should Know to Familiarize Your Ebike

E-bike is a bike with an electric motor instead of a traditional bike engine. It generally has a battery in the frame (or attached to it), and this battery is charged by connecting to the power source or plugging a charging cable into the frame. It has a throttle, which, if turned on, sends power from the battery to the motor (which is connected to the rear wheel), and it is activated by pushing the throttle. The following are some of the ways to familiarize your ebike.

1. Look at the battery

The battery is the prime moving part and the thing you feel the first. It is advisable to push the tires and look at the battery as you try to find out if it has enough charge. It might be hard for you to push your bike if the battery is completely drained. Ensure that the charge is sufficient for you to at least use the bike for a few hours before charging it again. If the battery is not enough, it might be time for you to buy a new one.

2 . Check the side wheel assembly

While checking this part of your ebike, make sure that there are no tires worn out or any other issues as they might cause an accident when using your ebike, especially in areas with uneven paths or roads. The tires should also be pumped to the right air pressure to prevent accidents.

3. Test the pedals

The pedals are there for you to push and for this reason, make sure that they move freely, as bending your feet to try them when riding would be very uncomfortable. The throttle should also have resistance when using it, and this helps you determine whether or not the throttle is stuck in a position that could cause it to fail when riding. When you are sure that everything is all right with the throttle, take a test ride and if everything is okay, replace the battery cover.

4. Pre-ride

This is one of the things that you might want to do to ensure your safety while riding. Ensure that the bike has enough charge, check if you have all the tools you will need during the ride, and check on your helmet and other clothing since this is one of the safest times to fit them in case they need any repairs. It is important to ensure that you are safe while riding, and this should be a priority.

5 . Check the brakes

This is the most significant part of your ebike since you need to be able to stop using the brakes when riding. If your brakes are networking correctly, you might find yourself almost crashing into other people, vehicles, and even buildings. The good thing is that there are no cables in the e-bike brakes, so if there is any fault with them, it is easily noticeable.

6 . Check the chain

The chain is connected to the rear wheel, and if it is worn out. Then this may result in you not being able to ride it. This can cause accidents, and there are no cables attached to a chain, so if the chain is worn out. Several things could be brought up as reasons for this. One of them would be lack of maintenance which might have been neglected, while another would be people riding on trails that have rocks or other objects on them, which may cause damage to the chain when going over them.

7 . Check the wheel rims

The wheel rims are very important, and if they are worn out. You will not be able to ride on uneven surfaces because they may be damaged when going over them. You should make sure that your wheel rim is safe, and this can be verified by checking the condition of the frame and its structure.

8 . Look at your tires

It is possible to tell whether or not your tires are worn out by looking at them, but it is also possible for you to check them to see if they have any cracks or tears that might mean that there would be damage when riding on uneven surfaces through water and rocks.

9 . Check your cables

Cables are important in e-bikes, and if they are working correctly, you may find yourself with a bike that does not function. There are no cables in the e-bike brakes, so you can check them and see if they have any damages that might prevent them from working correctly. If there is something wrong with the cable, both brakes will usually have the same problem, making it easy to detect where the damage is and how severe it is. It is also possible to test this by simply moving the brake lever slightly while pushing on the pedals and monitoring its result to ensure that there would be no issues when riding.

The above are all critical factors to be familiar with when it comes to your ebike. If you master these, you can easily ride your bike anywhere, saving you a lot of frustration and discomfort. Make sure that everything is appropriately fine before riding it any further.


FREE SHIPPING
Ebikes shipped directly to you free of charge
30-DAY FREE TRIAL
Just send it back to us if you do not like it
2-YEAR WARRANTY
A much longer warranty time is provided
LIFETIME SUPPORT
The experts from HJM Bike are always here to help you